10 Best Wake Shapers (2021) – Wave Makers

If you are a wakesurf rider, you should consider using a wake shaper. When you begin your hunt, you might find that it is hard to determine what the best wake shaper on the market is.

That is where we have come to help. Also known as wave makers, wake shapers will give you more consistent waves out on the water.

They make it easier on both the rider and the driver of the boat, dispersing the water in a more logical way so that you can have more fun and worry less.

When it comes to looking for the right wake shaper, you will need to think about the size you need, how easy it is to install, and even how it attaches to the boat.

We have found the best wave makers for you and broken down everything that you need to know before you decide to buy one.

10 Best Wake Shapers (2021)


Wave Size



Check Now

1. SWELL Wake Creator 2.0

Editor's Choice




2. Liquid Force Edge

High Performance




3. Wake 10 Wave Maker

Budget Friendly




4. SWELL H3X Plus

Extra Durable




5. Liquid Force Pro 2




6. SWELL Wake Shaper Slim




7. Mission Delta




8. Nauticurl Flex Wake




9. Sylvan Wave Maker




10. Tidal Wake XLR8




1. SWELL Wakesurf Creator 2.0 Wave Shaper

Best Wake Shaper (Editor's Choice)

Our choice for the best wake shaper is the SWELL Wakesurf Creator 2.0. This wakesurf shaper is versatile and easy to use, making it an excellent option.


Looking at the design of the Creator 2.0 includes suction technology, which means that it is not using Velcro or an adhesive to keep your shaper connected to your boat.

There is no need to weight the boat either, because it is designed to work on either side without affecting the movement of the boat. As a result, you will be able to carry more items with you on the boat and leave the sandbags back at the shore where they belong.

The wake shaper area is 72 square inches, so it is smaller than a lot of the other shapers out on the market.


The best feature that you will get with this shaper is that it is easy to install and easy to remove.

There will be no battle to do it and you will be able to get it off and on without any struggle on your part. The shaper will also float really well, so if it comes off of your boat when you are out on the water, you are not going to lose it or have to go hunting it down.

  • Floats well
  • Suction Technology
  • Easy Installation
  • Doubles Your Wakesurf Wave
  • Switches from Port to Starboard instantly

2. Liquid Force Wakesurf Edge Wake Shaper

High Performance

If you are hoping for a wake shaper that is more appropriate for high performance riders, we recommend the Liquid Force Wakesurf Edge Mega.

This is the largest shaper out on the market, which is both a pro and a con, depending on what you are expecting from the shaper.


As we said before, this is the largest wake shaper that you can get. It is designed with a huge water displacement wing that will give you the maximum amount of wave height. It has the largest wake shaper face as well, coming in at 14 by 18 inches, or 252 square inches.


The best feature that you will get from the wake shaper is that it has built-in flotation. You do not need to worry that the shaper is going to wind up at the bottom of the water, since it will not sink. There is a Wakesurf Edge wing that is rotomolded and it is sealed so that it is completely air-tight.

Since the size is so large, this shaper is best for boats that are a minimum of 21 feet and have at least a 325hp engine as well as a Sumo water ballast system. The load of your boat with this shaper should be toward the nose of the boat.

  • Built-in flotation
  • Made with Durable Rust-Free Material
  • Super Strong Suction Cups
  • Concave Water Channelling Wind
  • Huge water displacement wing
  • Really big, so it is harder to transport

3. Wake 10 Wakesurf Creator

Budget Friendly

If you are looking for a wake shaper that is easier on the wallet, take a look at the WAKE 10 Wakesurf Creator. This is a universal shaper that will work on most inboard boats without any problem.


This shaper is designed a little bit differently than some of the others. It does still use suction cups to attach it. It also allows a tool-free installation, so you should be able to get it up without any trouble.

It does not work as well directly in the back of the boat, but might need to be mounted on one side or the other for the best results. The device was also made in the USA and the company is based in the United States, so customer service is easy to talk to if you have any issues.


There are some good features to look at with this shaper, including that it comes with a lanyard with two carabiner clips. Each clip can support up to 165 pounds, so they should be pretty strong to hold onto.

The only major downside to this shaper is that it does not have any kind of flotation mechanism, so it will sink to the bottom of the water if it becomes detached. Fortunately, the suction is incredibly strong, so the risk that it will come off while you are using it is relatively low.

  • Tool-free installation
  • Carabiner clips each hold up to 165 pounds
  • Universal shaper
  • Made in the USA
  • Lanyard included

4. SWELL H3X Plus Wave Maker

Extra Durable

Durability is a huge advantage when it comes to wake shapers. Our choice for the best wake shaper that is also the most durable is the SWELL Wakesurf Creator H3X Plus. This shaper was really built to last and it will not disappoint you in any way.


Starting off with its design, the SWELL Wakesurf Creator H3X Plus is designed with a HEX pattern.

When the pattern is combined with the rotating base, you will get a reliable angle when the shaper is attached to the boat. This will also help reduce turbulence while still increasing the overall size of waves that you are trying to get out of the shaper.


One of the best features that you will get with this shaper is that it has 9 adjustable positions on its face. This will allow you to extend and to contract the wave face in order to fine tune it to meet your needs.

As a result, you will get the waves that you were really hoping for. It also has an excellent, strong suction, and is so easy to put on and take off that you should be able to do it within a matter of seconds. This has also been made in the USA.

  • HEX Pattern
  • Rotating Base
  • More Push for longer waves
  • 9 Positions to adjust to
  • Super-fast installation
  • With so many positions to adjust, there is a learning curve with using this

5. Liquid Force Edge Pro 2 Wake Shaper

Another great wake shaper is the Liquid Force Wakesurf Edge Pro2 wake shaper.

This is one of the larger shapers that are out on the market, so you can expect it to give you larger waves, but it is also larger to transport.


When we look at the design for the Pro Shaper II, the first thing to note is that it comes with two, 4.5 inch suction cups.

The cups have an incredibly strong hold as well, so you will not have to worry about the cups coming off as you are using it. If they do happen to lose their grip, however, you will be able to find the shaper again, because it was designed with a built-in flotation.


One of the best features that you will get with this shaper is that it has a concave channelling wing surface. This will help push the water out of the way, creating extra-large waves for you to go over.

The large water displacement is wonderful for any rider who was really aiming for that. It is a little bit harder to install due to the placement of the plastic handles on the shaper, but it might just be a learning curve that you will need to adapt to.

  • 4.5 inch suction cups
  • Concave Channelling Wing Surface
  • Built-in Flotation
  • Super strong attachment
  • Large Water Displacement
  • The front handle is hard to secure

6. SWELL Wakesurf Creator Slim

If you are looking more for a slimmer design for your wake shaper, we suggest you take a look at the SWELL Wakesurf Creator Slim.

This shaper was designed to take up very little space, making it a great solution for hulls that have a lot of steps to work around.


The design to the Creator Slim was intended specially for boats that have narrow or stepped hulls. This means that it will fit perfectly on Mastercraft series boats, like the X2, X9, X10, and even the Maristar.

It will also work on Sanger series boats like the V210 and the V215. Really, any boat that you have that you are going to have to work around the hull is going to be much more effective with the Creator Slim.


The suction cups with this wake shaper have a smaller footprint that most other shapers out on the market. That will not diminish the effectiveness of the product, however. You will still get excellent waves and great turbulence, even with its narrow mounting area.

The types of waves that you will get are longer as well, so you might need to get used to the type of waves that it makes. Overall, you will not be disappointed if you have limited mounting space to work with.

  • Suctions with smaller footprint
  • Great solution for boats with only a narrow mounting area
  • Still provides excellent waves
  • Creates longer waves
  • Introduces turbulence effectively
  • Does not work well for standard hulls

7. Mission Delta Wake Shaper

The Mission Boat Gear Delta Wake Surf Shaper Version 2.0 is another wave maker to take a look at when you are looking for the perfect wake shaper to meet your needs. This is a high-quality shaper that will be able to get the job done well.


The design of the Delta Solution includes the nylon material. It is also made to hold onto most boats with a sturdy hold, using the high-powered suction that it offers.

That said, there have been some reports that the shaper might not hold well to boats that have added graphics to them, because it just cannot get the same level of suction. The suction cups are propriety lofted as well to conform well to curved surfaces.


The features of this shaper include the easy, no-tool install. You should be able to get it on pretty quickly and get a good hold. It might take you a couple of times to really get that strong stick, but once it is securely attached, it will not come off again easily.

The shaper also has a contoured front panel with side vents, which will increase the amount of turbulence. More turbulence will give you the best surf wave possible. Since they have a compact design, you will not waste as much fuel.

  • Fuel efficient
  • Easy, no-tool install
  • High-powered suction
  • Contoured front panel
  • Works on most boats
  • May have trouble holding onto coated boats

8. Nauticurl Flex Wake Shaper

The Nauticurl Wakesurfing Flex Wake Shaper Surf Gate is another nice, compact shaper that you might want to check out.

This will work on many boats that have steps around the hull, making it harder to get a good stick, including the X2, X10, X15, X30, X45, X80, XStar, Maristar 197, Tige RZR, and many others.


The design of the Flex wake shaper includes a black anodized aluminum levers. These also have stainless steel springs, which will not rust or wear down over time.

The wake shaper is made of a sturdy aircraft aluminum alloy as well that has a durable and protective powder coat finish, ensuring that the coating on the shaper will last a long time. The shaper was made in the USA as well.


The shaper comes with three heavy duty suction cup attachments. They are 3 5/8inches in diameter as well, which is narrow, but not too small. Having the three cups will also help really get the strong suction that you would want.

The shaper is buoyant as well and has water absorbent foam to help keep it afloat. Of course, the best feature is that it will easily fit down any of the narrow boats that you will try to put it on, making sure that you will not be stopped from surfing by the design of your boat.

  • Attaches in seconds
  • Heavy duty triple suction cups
  • Professionally engineered
  • Black anodized aluminum levers
  • Sturdy aircraft aluminum alloy
  • We didn’t find any

9. Sylvan Wave Maker

The Sylvan Wave Maker Surf Gate Wake System is another wake shaper that you should consider.

It is a durable wake shaper with an ultra-high molecular weight polyethylene and it has a high buoyancy rate as well.


When you look at the design of this wave shaper, you will first see that it is made to be extremely lightweight. This works out because of the aluminum alloy fixture.

Combined with the industrial strength rubber suction caps and foam inserts for flotation, and you will have an incredibly lightweight shaper that should be able to stay afloat, regardless of whether it happens to come off the boat or not. The shaper has been made using a CNC machine as well, so it will be completely uniform in its manufacture.


When we look at the features, we will see that it is mid-sized. It is 13 inches long, 8 inches wide, and 10 inches tall. It only weighs 3 pounds, which shows how lightweight the shaper really is.

The only real downside that we have found with this shaper is that it does not always get a solid stick when you are working with a boat that has a curved exterior. Otherwise, this is a lightweight shaper that has an easy time floating in the event that the shaper detaches from the boat.

  • Aluminum Alloy Fixtures
  • CNC Machined
  • Floats
  • Extra Durable
  • Lightweight
  • Hard time working on curved boat surfaces

10. Tidal Wake XLR8 Wake Surf Shaper 

The final wake shaper that we are going to review is the Tidal Wake XLR8 Wake Surf Shaper Wake Generator.

This is a nice, compact shaper that will be easy to transport with you in between rides and it will easily fit inside of a glove box for storage.


The design of the XLR8 shaper has been patented so that it really will grow and accelerate your wake, giving you a larger sweet push with even more push. The design also has been engineered so that you will get wedge-style performance.

It really is great for both skim and surf riders alike. The design is really to give you the biggest and best wake that you could possibly get. It is made to be easy enough for one person to install it from inside of the boat.


There are a lot of great features that come with this wake shaper. The shaper has the strongest suction cups that you would be able to find elsewhere. As a result, you should be able to easily do tricks and big airs.

This is because there is a taller, longer, and wider wake, giving you a huge push. As a result, this shaper works really well for both beginners and more experienced riders. More experienced riders will have a lot of fun with this shaper.

  • Grows and accelerates your wake
  • Strongest suction cups
  • Great for tricks
  • Good for both skim and surf riders
  • Wedge Style Performance
  • We didn’t find any

Factors To Consider When Buying A Wave Maker

Wake Maker Features

Installation & Attaching Mechanism

One of the major factors to consider is how easy it is to install the wake shaper. You really want it to be simple and as quick as possible.

This is mostly because if the shaper falls off while you are using it, you will want to be able to reattach it while you are still in the water and not have to go all the way back to shore to get it reinstalled. Some shapers are attached with an adhesive while others are attached with suction cups to the boat that you are following.


You do not want to be replacing your wake shaper after a couple of uses. You will want it to last for as long as possible. Shapers that are made with stainless steel are more durable and will have a better longevity, because they will not rust or corrode over time.

The material will determine whether the shaper is durable or not, but do not be fooled into thinking that heavier shapers last longer. You still need your shaper to be lightweight as well as durable, so that it does not sink easily when you are using it.

Water Channelling

Another factor to look at with your wake shaper is its water channelling. The shapers will not allow water to pass through them so that they will not succumb to pressure and fall off. If they do fall off, you will have to stop surfing and hunt the shaper down in the water.

There are a few different channelling options out there, including concave blades that will allow water to pass through them, which is the design that most wake shaper manufacturers will opt for. There are sometimes vents that will create turbulence, making the waves easy to handle.

Suction Cups

Some wake shapers are secured with suction cups. If that is the case for the shaper that you are looking at, you will need to make sure that the suction cup that it comes with is incredibly strong. You do not need it to let go when you are going over a rough wave.

Likewise, if you have a weak suction cup, you are going to be less likely to try it out on rougher waters, knowing it might not hold. The material of the suction cup is what you should be looking at, since many are made with weak or flimsy material.


You will notice that wakeshapers come in a range of sizes. In general, you will want to opt for a smaller shaper over a larger shaper. They will attach to the boat much easier and are easier to transport around and easier to store when you are not using it.

The portability of it might not matter if you live near the water and use it often. The size also comes into play with the size of the boat. If the boat is bigger it can handle a bigger shaper, but smaller shapers work better on smaller boats.


The buoyancy or the ability of the shaper to float will also be a factor to consider. This is because if the shaper does fall off, you do not want it to sink under the water, never to be seen again.

If you have to go back and retrieve your shaper, you want to find it right away so that you can get back to surfing. Otherwise, you might be replacing a wake shaper often as you will not be able to find them again if they have sunk down in the water.

Benefits Of Using A Wake Shaper

Wake Shaper Benefits

There are a lot of benefits to using a wake shaper, including making the waves more consistent and predictable, it makes it easier to drive the boat, and it makes it easier to switch surf sides. This is all of the benefits to using one.

Waves Are More Consistent And Predictable

To begin with, the waves will be more consistent and predictable when you use a wake shaper.

Since the shaper is always in the water, causing turbulence, your waves will be consistent. You can even adjust how you surf to match the waves that your shaper gives off. All of this means that you are going to have more fun on your best wakesurf board.

Boat Is Easier To Drive

When you are pulling behind your boat, you need your boat to be weighted to keep things simple. A wake shaper will eliminate the need to make the boat heavier since it adjusts the turbulence for you, making the boat easier to drive and giving you more space inside of your boat.

Switching Surf Sides Is Easier

Finally, using a wake shaper makes it easier for you to switch surf sides. When you use weights instead of a shaper, you cannot simply change sides. Instead, you can move sides without having to think about weights or what might happen to the boat.

Final Words

While you might still be new to the concept of wake shapers, there are some break advantages to using them, including making it easier on the driver, making it easier to surf on each side, and making the waves more consistent.

For those reasons, our choice for the best wake shaper is the SWELL Wakesurf Creator 2.0 shaper. This shaper is easy to install and will allow you to remove it just as quickly. It also has great buoyancy so you won’t worry about it sinking if it comes off.

If you are more of a high performance surfer, you might be happier with the Liquid Force Wakesurf Edge Mega Wake Shaper, which is the largest wake shaper out on the market.

Larger shapers are not right for everyone, but if you are putting some pressure on the shaper, it is the way to go.

Give wake shapers a try, if you haven’t yet. You will not be disappointed with the results.

Leave a Comment